|
|
|
|
|
|
Arduino MEGA 2560
|
Price: $64.95
|
|
|
The Arduino Mega is a microcontroller board based on the ATmega1280. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
|
|
|
|
|
|
|
|
|
|
Arduino Pro Mini 328 - 3.3V/8MHz
|
|
Price: $18.95
|
|
|
It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
We really wanted to minimize the cost of an Arduino. The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep a low cost, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.
Please note: Arduino 0015 supports the ATmega328 but not yet at 8MHz. Please select 'Arduino Duemilanove w/ 328' within the Arduino software but expect your delays to work twice as long (Code will run half as fast as the Duemilanove is at 16MHz).
FEATURES:
* ATmega328 running at 8MHz with external resonator (0.5% tolerance)
* Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
* USB connection off board
* Supports auto-reset
* 3.3V regulator
* Max 150mA output
* Over current protected
* Reverse polarity protected
* DC input 3.3V up to 12V
* On board Power and Status LEDs
|
|
|
|
|
|
|
|
|
|
Arduino Pro Mini 328 - 5V/16MHz
|
|
Price: $18.95
|
|
|
It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users with the limitations of system voltage (5V), lack of connectors, and USB off board. We really wanted to minimize the cost of an Arduino. The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep a low cost, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable, but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. FEATURES * ATmega328 running at 16MHz with external resonator (0.5% tolerance) * USB connection off board * Supports auto-reset * 5V regulator * Max 150mA output * Over current protected * Reverse polarity protected * DC input 5V up to 12V * On board Power and Status LEDs
|
|
|
|
|
|
|
|
|
|
Arduino Uno
|
|
Price: $29.95
|
|
|
This is the new Arduino Duemilanove. The Duemilanove automatically selects the appropriate power supply (USB or external power). Board comes fully assembled and tested with ATMega328 pre-loaded with bootloader.
|
|
|
|
|
|
|
|
|
|
ATmega328p with Arduino Bootloader
|
|
Price: $5.50
|
|
|
ATmega328p with Arduino Bootloader
|
|
|
|
|
|
|
|
|
|
PhoneDrone Board for Android
|
|
Price: $99.99
|
|
|
SPECIFICATIONS
- 8 Input&output PWMs
- Native USB host master (MAX3421)
- Native USB slave (Atmega32-au)
- Arduino Compatible
- Atmega2560 as main controller
- Atmega32-u2 as FTDI substitute and PPM encoder
- Three spare serial ports to communicate with other boards (including APM)
- Build-in 5V-2A switched power regulator (input range 6V - 36V)
- Build-in 3.3V LDO power regulator
- Android TM compatible...
- All Atmega2560 pins exposed.
- High quality PCB is ROHS/lead free, Gold immersed.
- Dimensions: 4" x 1.6"
|
|
|
|
