|
|
|
|
|
|
2.4GHz Amplifier 1000mW
|
Price: $50.00
|
|
|
2.4GHz Amplifier 1000mW
|
|
|
|
|
|
|
|
|
|
Adapter SMA Male to RPSMA Female
|
|
Price: $8.75
|
|
|
Adapter SMA Male to RPSMA Female
|
|
|
|
|
|
|
|
|
|
Antenna 2.4GHz RP-SMA 4.9dBi
|
|
Price: $9.35
|
|
|
Antenna 2.4GHz RP-SMA 4.9dBi
|
|
|
|
|
|
|
|
|
|
Antenna 900MHz RP-SMA 3.1dBi
|
|
Price: $10.60
|
|
|
868MHz-928MHz antenna
|
|
|
|
|
|
|
|
|
|
Ardupilot Mega MinimOSD
|
|
Price: $65.99
|
|
|
Features and specifications: - ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6-pin ISP header
- Two independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections
- +5V 500mA regulator for up to +12V supply input
- Solder jumper for PAL video option
- Exposed test points for HSYNC and LOS
- Dimensions: 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H
|
|
|
|
|
|
|
|
|
|
ArduStation
|
|
Price: $57.20
|
|
|
New Portable Open-Source ArduPilot Ground Station (Arduino and Xbee Based). For use with original ArduPilot and ArduPilotMega 1.x. (Not currently compatible with ArduPilotMega 2.x or ArduCopter 2.x,)
|
|
|
|
|
|
|
|
|
|
DroneCell
|
|
Price: $120.00
|
|
|
The DroneCell is a cell phone for your robotics/ electronics/ minicomputer/ anything project. Its an all-in-one communication device: communicate via texts, phone calls, or even over the internet. Any device with a TTL UART can communicate with the DroneCell.
|
|
|
|
|
|
|
|
|
|
Interface Cable Bulkhead RP-SMA to U.FL
|
|
Price: $4.95
|
|
|
This is a 4" connector cable that interfaces U.FL RF connectors to Reverse Polarity (Female ) SMA antennas.
|
|
|
|
|
|
|
|
|
|
Interface Cable Bulkhead SMA to U.FL
|
|
Price: $4.95
|
|
|
This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA antennas (not RP-SMA!).
|
|
|
|
|
|
|
|
|
|
PhoneDrone Board for Android
|
|
Price: $99.99
|
|
|
SPECIFICATIONS
- 8 Input&output PWMs
- Native USB host master (MAX3421)
- Native USB slave (Atmega32-au)
- Arduino Compatible
- Atmega2560 as main controller
- Atmega32-u2 as FTDI substitute and PPM encoder
- Three spare serial ports to communicate with other boards (including APM)
- Build-in 5V-2A switched power regulator (input range 6V - 36V)
- Build-in 3.3V LDO power regulator
- Android TM compatible...
- All Atmega2560 pins exposed.
- High quality PCB is ROHS/lead free, Gold immersed.
- Dimensions: 4" x 1.6"
|
|
|
|
|
|
|
|
|
|
Remzibi OSD 3DR
|
|
Price: $89.99
|
|
|
Features
- PC connection for configuration/calibration purposes using dedicated PC program
- No need for a free channel on your receiver for OSD to function
- GPS detection and configuration automaticaly
- Home autosave function configurable based on number of satelites - button "save home" works independently
- Metric(km/h) or feet(MPH) units - configurable
- Zero altitude to airfield level - configurable
- Fully configurable screen layout (no more cropped off data around the screen border like some other OSD's)
- Graphical symbols and fonts configurable (Font editor for creating your own symbols and characters)
- Voltages calibration function and all ADC inputs including alarms
- Frequency calibration for Hz or RPM (gain definable)
- PC configuration software includes GPS emulator for testing and setup purposes.
- Language Editor - Currently available in English, Polish and French.
Simple to use langauge editor can be used to translate to any other
language.
- Board measurements: 1.6 in x 1.1 in ( 4cm x 2.7cm)
|
|
|
|
|
|
|
|
|
|
RPSMA Male to SMA Female Adapter
|
|
Price: $8.75
|
|
|
Adapter SMA Male to RPSMA Female
|
|
|
|
|
|
|
|
|
|
Xbee Telemetry Kit
|
|
Price: $150.00
|
|
|
The Xbee Telemetry kit contains;
-DIYDrones' own Xbee adapter!
-XBee-PRO 900 extended range module w/ RPSMA connector!
-XBee-PRO 900 extended range module w/ wire antenna!
- Antenna 900MHz RP-SMA 3.1dBi!
- XtreamBee USB Adapter!
- Servo Extension Cable 15cm Female-Female
|
|
|
|
|
|
|
|
|
|
Xbee-Oil Pan connector cable
|
|
Price: $1.50
|
|
|
With this custom cable you can connect your xbee set up to the telemetry port on the "Oil Pan" IMU without having to use several jumper cables!
|
|
|
|
|
|
|
|
|
|
XBee-PRO 900 extended range module w/ RPSMA connector
|
|
Price: $54.95
|
|
|
|
|
|
|
|
|
|
|
|
|
XBee-PRO 900 extended range module w/ wire antenna
|
|
Price: $42.95
|
|
|
|
|
|
|
|
|
|
|
|
|
XtreamBee Board (No XBee included)
|
|
Price: $24.95
|
|
|
This is the most advanced and competitive XBee interface board you will find! Is bread board compatible, has 4 status LED's (one selectable to display ASC or RSSI), build-in 3.3V power regulator, configuration solder jumpers and an unique feature that allows you set the device as Master or Slave FTDI mode with a simple slide of a switch!
|
|
|
|
|
|
|
|
|
|
XtreamBee USB Adapter
|
|
Price: $24.95
|
|
|
This is a simple to use, USB to serial base unit for the XBee line. Plug the unit into the XBee Explorer, attach a mini USB cable, and you
will have direct access to the serial and programming pins on the XBee
unit.
|
|
|
|
