You are here: Home > Sensors and IMUs
Sort By:
Page of 1
Absolute Pressure and Temperature Sensor - BMP085
Price: $24.95

The BMP085 is a high-precision, ultra-low power barometric pressure
sensor.
Airspeed Kit with MPXV7002DP
Price: $24.95

This is a stand-alone airspeed sensor. Includes Pitot Tube and 12cm Female to Female Servo Cable.
ArduIMU+ V3
Price: $78.90

This hardware consists of an Integrated 3-Axis Gyro, 3-Axis Accel and 9-Axis MotionFusion (all in one chip!), dual power regulator (3.3v and 5v), GPS port, an Atmega328@16mhz and a lot of status LEDs. It's the cheapest IMU-AHRS on the market!
ArduPilot Mega IMU Shield/OilPan Rev-H V1.0 (No pin headers)
Price: $149.95

The new ArduPilotMega IMU Shield! This board features a large array of sensors needed for UAV and Robotics applications, including three axis angular rotation and accelerations sensors, absolute pressure and temperature sensors, 16MBits data logger chip and more! It's designed to fit on top (or bottom) of the ArduPilot Mega board, creating a total autopilot solution when a GPS module is attached.
ArduPilotMega IMU Shield/OilPan Rev-H V1.0 (With Pins)
Price: $159.95

The new ArduPilotMega IMU Shield!
Breakout Board MPXV7002DP
Price: $19.95

Differential Pressure Sensor board.

Features:
-2 to 2 kPa (-0.3 to 0.3 psi).
0.5 to 4.5 V Output
Full ArduPilot Mega kit
Price: $250.00

The ArduPilot kit contains:


-The Arduino compatible ArduPilot Mega platform!
-The IMU sensor shield, better known as the"Oil Pan" Revision H!
-The Mediatek GPS with the basic adapter!
- 5x Servo Extension Cable 5cm Female-Female
- 1x EM-406/uBlox/MTK Adapter Cable 5 cm
Full ArduPilot Mega kit (soldered, code loaded and ready to fly) from Udrones!
Price: $299.95 Buy at Udrones

The ArduPilot kit contains:


-The Arduino compatible ArduPilot Mega platform!
-The IMU sensor shield, better known as the"Oil Pan" Revision H!
-The Mediatek GPS with the basic adapter!
- 1x EM-406/uBlox/MTK Adapter Cable 5 cm!
HMC5883L - Triple Axis Magnetometer
Price: $44.90

HMC5883  - Triple Axis Magnetometer
MB1000 LV-MaxSonar-EZ0 High Performance Ultrasonic Range Finder
Price: $29.95

The sensor offers three standard outputs (analog voltage, serial data, and pulse width) that are available on all the MaxSonarŽ-EZ products. The LV-MaxSonarŽ-EZ products also operate with very low voltage from 2.5V to 5V with less then 3mA nominal current draw.
MB1020 LV-MaxSonar-EZ2 High Performance Ultrasonic Range Finder
Price: $29.95

The sensor offers three standard outputs (analog voltage, serial data, and pulse width) that are available on all the MaxSonarŽ-EZ products. The LV-MaxSonarŽ-EZ products also operate with very low voltage from 2.5V to 5V with less then 3mA nominal current draw.
MB1030 LV-MaxSonar-EZ3 High Performance Ultrasonic Range Finder
Price: $29.95

The sensor offers three standard outputs (analog voltage, serial data, and pulse width) that are available on all the MaxSonarŽ-EZ products. The LV-MaxSonarŽ-EZ products also operate with very low voltage from 2.5V to 5V with less then 3mA nominal current draw.
MB1040 LV-MaxSonar-EZ4 High Performance Ultrasonic Range Finder
Price: $29.95

The sensor offers three standard outputs (analog voltage, serial data, and pulse width) that are available on all the MaxSonarŽ-EZ products. The LV-MaxSonarŽ-EZ products also operate with very low voltage from 2.5V to 5V with less then 3mA nominal current draw.
MB1200 XL-MaxSonar-EZ0 High Performance Ultrasonic Range Finder
Price: $44.95

Super high performance sonar range finder with high power output, noise rejection, auto calibration and long-range wide detection zone (hardware gain of 4000).
MB1260 XL-MaxSonar-EZL0 High Performance Ultrasonic Range Finder
Price: $54.95

Super high performance sonar range finder with high power output, noise rejection, auto calibration and long 10 meter range wide detection zone (hardware gain of 4000).
Optical Flow Sensor
Price: $39.99

 
This board comes with the ADNS3080 mouse sensor and a lens-mount assembly that can let your vehicles use some pretty cool features such as horizontal altitude hold for quads and helis, odometry and obstacle avoidance.


PhoneDrone Board for Android
Price: $99.99

SPECIFICATIONS

- 8 Input&output PWMs
- Native USB host master (MAX3421)
- Native USB slave (Atmega32-au)
- Arduino Compatible
- Atmega2560 as main controller
- Atmega32-u2 as FTDI substitute and PPM encoder
- Three spare serial ports to communicate with other boards (including APM)
- Build-in 5V-2A switched power regulator (input range 6V - 36V)
- Build-in 3.3V LDO power regulator
- Android TM compatible...
- All Atmega2560 pins exposed.
- High quality PCB is ROHS/lead free, Gold immersed.
- Dimensions: 4" x 1.6"
Pitot Tube - Combined Static & Dynamic Probes
Price: $8.95

This pitot tube is a single assembly version of AC-0001-02.  Can be used with the Airspeed Kit or any differential pressure sensor.
Pitot Tube- Static and Dynamic Probe Set
Price: $5.95

This is a nice pitot tube set used to measure the airspeed.  This is done by analyzing the stagnation pressure (dynamic + static) of a fluid.  Can be used in ArduPilot Shield and MPXV5004DP Breakout Board.

Set includes the static and dynamic pressure probes.
Silicone Tubing 1 ft
Price: $1.95

This silicone tubing can be used with the differential pressure sensor.  

Note: If you buy more than 1 ft, we will ship a piece measuring the total distance purchased. i.e. buy a quantity of 3 you will get tubing measuring 3 feet in length.
Xbee-Oil Pan connector cable
Price: $1.50

With this custom cable you can connect your xbee set up to the telemetry port on the "Oil Pan" IMU without having to use several jumper cables!