 |
Features
- Atmega328 at 16Mhz with Arduino Bootloader.
- XBee Socket and 3.3V powered (I've included some holes near to the antenna so you can hold it with a strap).
- Wireless programing: You can use XBEE to program it (needs 2n2222 transistor available at any radioshack).
- Can be powered with 2 and 3 cell LIPOS (diode protected and regulated).
- Huge 4 line screen with backlight, very clear under the sun! (2 pots to control the backlight and contrast).
- FTDI port to upload code, also the boards is ready to be programmed with XBee.
- Six button to navigate and change screen and options.
- Very noisy buzzer that can be used to alert you when it has low battery or low altitude.
- 6 I/O analog pins available, including the I2C port.
- 2 powered SERVO OUTPUTS (Tilt & Pan) that can be used to control a directional antenna (NICE!).
- Extra 3.3V and 5V volts outputs.
- Status LED's.
- The software is ArduPilot compatible and Open Source.
|
|
|
